FCAW, MIG, Stick and TIG on carbon steel, stainless and aluminum.
Welders run FCAW, GMAW/MIG, SMAW/Stick and GTAW/TIG in carbon steel, stainless steel and aluminum. The shop welds pipe and structural steel, with fillet and groove joints and multi-pass welds on thicker material. Every weld is controlled to a WPS, PQR and WPQ, and the work follows AWS D1.1, ASME Section IX, B31.3 and other codes depending on what the job requires. A Certified Welding Inspector reviews joints on the floor while the work is in progress, and each weld is documented to the procedure that produced it.
